Prestige PS13 - nosič medzi lyžiny

Aguri Prestige aluminum roof racks mounted between raised roof rails with a gap.

Prestige roof racks are characterized by their elegant design and installation BETWEEN the roof rails. Thanks to this, they become an integral part of the vehicle, do not protrude above the roof, almost do not increase the vehicle height, and do not produce wind noise while driving.

Aguri Prestige will satisfy even demanding users at a fraction of the price of “premium-brand” roof racks. Its aerodynamic shape ensures low noise, attractive design, and universal compatibility with common accessories mounted on roof racks or inserted into a standard T-slot.

Profile:

The roof racks are made from a modern aluminum profile that ensures low weight and maximum material strength.

A profile height of 23 mm and width of 65 mm guarantee a low, attractive profile without limiting the use of most racks with “U” clamps around the bar.

This is an almost universal aerodynamic roof rack with a standard T-slot. Therefore, these racks are compatible with most modern roof rack accessories, whether mounted around the bar or inserted into the T-slot.

Easy installation.

Installing the Aguri Prestige roof rack is incredibly simple. Unlock the locks on both ends and remove the cover. This exposes the heads of all screws used to adjust and secure the rack to the vehicle. Before installation, it is recommended to loosen all screws to make adjustment easier. Place the rack on the raised rails and position the lower jaw underneath—this sets the base in place. Adjust the width of the entire rack so it spans the full distance between the rails. Tighten the screws with an Allen key and the rack is secured to the vehicle. Finally, insert the rubber into the T-slot and lock the end caps. 

Packaging:

The package includes 2 complete bars for installation on the front and rear of the vehicle roof. Due to limited width adjustability, most vehicles require two different bar lengths. The longer one is always mounted at the front and the shorter at the rear, as the vehicle roof narrows towards the back. 

Width adjustment:

The racks have adjustable width within 5 cm for easier installation and versatility. PS models include two different-length bars for vehicles with a narrowing roof at the rear. The longer bar is placed in the front, the shorter in the back. Thanks to adjustable width, you can decide whether to mount the rack more toward the front or closer to the trunk. The feet can be extended or shortened as needed. The aluminum bar is rigid; only the feet move along the ends of the profile. Even at maximum extension, the manufacturer guarantees sufficient strength of the roof rack as a whole. 

Color options:

These racks are always made from the same material – aluminum – but you can choose between a silver center bar (aluminum painted silver) or a powder-coated black finish. The rack feet are always black; it’s up to you whether you prefer an all-black look or contrasting black feet with a silver center bar.